Second Lab Trial Produces Geopolymer Concrete
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
10 November 2023
SECOND LAB TRIAL PRODUCES
GEOPOLYMER CONCRETE WITH
METAKAOLIN & FLY-ASH
Laboratory trials with Murdoch University continue to produce promising results for
the Company. Suvo’s second round of trials successfully created a metakaolin and
fly-ash geopolymer concrete formulation, which again showcased a reduction in
greenhouse gas (GHG) emissions, when compared to the production of Ordinary
Portland Cement. Importantly, as fly ash is a waste derived product, the geopolymer
concrete formulation from this round of testing which is an equal part formulation
(one part metakaolin for every one part fly-ash) has the ability to significantly reduce
the per unit cost of production.
HIGHLIGHTS
Geopolymer concrete lab trials with Murdoch University continue.
New formulation includes Suvo metakaolin and waste derived material, flyash.
Including fly-ash with metakaolin potentially reduces greenhouse gas (‘GHG’)
emissions by ~70% compared to Ordinary Portland Cement (‘OPC’).
New geopolymer concrete formulation can significantly reduce cost base of
production.
The test work concluded that by further optimising the formulation ratios,
higher compressive strengths could potentially be gained.
Suvo Strategic Minerals Limited (ASX: SUV) (“Suvo” or “the Company”) is pleased to
announce its next iteration of results with its geopolymer concrete studies
Aaron Banks
Oliver Barnes
Agu Kantsler
NON-EXECUTIVE CHAIRMAN
NON-EXECUTIVE DIRECTOR
NON-EXECUTIVE DIRECTOR
Suvo Strategic Minerals Ltd. ABN 97 140 316 463
Head Office: Level 11, 40 The Esplanade, Perth, Western Australia 6000
Operations: 3610 Glenelg Highway, Pittong, Victoria 3360
The purpose of the second round of laboratory scale test work undertaken by
Murdoch University was to produce a geopolymer concrete with zero Ordinary
Portland Cement using the Company’s metakaolin combined with a waste derived
material, specifically in this formulation, fly-ash.
Geopolymer concrete is a low emission, environmentally friendlier alternative to
traditional concrete made with Ordinary Portland Cement. It is produced by
chemically reacting aluminate and silicate-bearing materials with caustic activators
like metakaolin, fly ash, ground blast furnace slag, and other waste-derived
components.
This second round of trials with Murdoch University, using metakaolin from the
Company's Gabbin deposit, focused on the potential of creating a geopolymer
cement that included fly-ash, a waste derived material, sourced from a power
station in Collie, Western Australia.
This geopolymer concrete formulation used a 1 for 1 ratio of metakaolin to fly-ash.
When using 100% metakaolin in a geopolymer concrete formulation a 50% reduction
in GHG emissions can be achieved (ASX Announcement: 3 November 2023). This
new formulation further reduces the GHG footprint as it halves the usage of
metakaolin and includes fly-ash which is a waste product whose emissions are
already attributed to the coal burning process.
Furthermore, fly-ash is traded at a significantly lower price when compared to
metakaolin which reduces the cost base of production of this geopolymer concrete.
Murdoch’s geopolymer cement laboratory ran two tests comprising of five samples
in each test. The first 5 samples returned an average compressive strength test of
16MPa. In the second round of tests, the sodium silicate activator was increased by
5% and it returned circa 70% increase in strength to 27MPa. Data collected
confirmed that by optimising the formulation ratios further, higher compressive
strengths can potentially be achieved.
Some examples of ‘every day’ concrete products with a compressive strength of
<25MPa include, post and rail retaining wall systems, retaining wall blocks, pavers,
culverts, soak wells and single-story house slabs.
Non-Executive Chairman Aaron Banks commented:
“The outcome of this round of testing was a critical piece of work for the Company
and it demonstrates that we can combine waste materials within our formulations.
This potentially achieves two important outcomes; in that we can halve the use of the
precursor material (metakaolin) thereby reducing both the cost base and the GHG
emission profile in the concrete manufacturing process.
By utilising waste by-products we can move further towards creating a circular
economy whereby we provide an industrial application for waste derived materials
that might otherwise be committed to landfill.
The Company used it’s Gabbin metakaolin in these trials to compare the results with
our previous test results using 100% metakaolin. Based on these successful results
with Gabbin metakaolin, the Company will look to commence geopolymer concrete
lab trials with Pittong kaolin and waste derived materials as this is potentially a
quicker pathway to commercialisation.”
Approved for release by the Board
-ENDS-
Test results
Identifier
Mass (g)
Density
(kg/m3)
Ave.
Diameter
Height
(mm)
Area
(mm2)
Load (N)
MPa
Ave. MPa
2*Std Dev
16.04
8.42
Ave. MPa
2*Std Dev
27.62
5.31
(mm)
2.1
30.58
1635.34
24.62
39.29
475.94
5914
12.43
2.2
30.85
1639.55
24.59
39.61
475.03
8915
18.77
2.3
31.17
1649.48
24.59
39.78
475.03
9467
19.93
2.4
28.65
1651.93
24.60
36.48
475.42
5047
10.62
2.5
30.80
1646.50
24.64
39.23
476.84
8802
18.46
Identifier
Mass (g)
Density
(kg/m3)
Ave.
Diameter
Height
(mm)
Area
(mm2)
Load (N)
MPa
(mm)
3.1
31.73
1709.60
24.60
39.06
475.16
13910
29.27
3.2
32.28
1723.76
24.60
39.40
475.29
14306
30.10
3.3
33.43
1718.41
24.70
40.60
479.16
11494
23.99
3.4
32.12
1706.94
24.71
39.25
479.42
13949
29.10
3.5
31.23
1700.25
24.73
38.23
480.46
12320
25.64
For further information, please contact
Aaron Banks
Non-Executive Chairman
E: aaron.banks@suvo.com.au
Company Profile
Suvo Strategic Minerals Limited is an Australian hydrous kaolin producer and exploration company listed on the
Australian Securities Exchange (ASX:SUV). Suvo is focused on production at, and expansion of, their 100% owned
Pittong hydrous kaolin operation located 40km west of Ballarat in Victoria. Suvo’s exploration focus is on near-term
kaolin and high purity silica assets with 100% owned Gabbin (kaolin), Eneabba and Muchea (silica sands) projects
located in Western Australia.
Pittong Operations
The 100% owned Pittong Operations, located in Victoria 40km west of Ballarat, is the sole wet kaolin mine and
processing plant in Australia and has been in operation since 1972. Pittong comprises the Pittong, Trawalla and Lal
Lal deposits located on approved Mining Licences MIN5408, MIN5365 and MIN5409 respectively.
At Pittong mining contractors deliver crude kaolin ore to stockpiles from the two currently operating mines, Pittong
and Lal Lal. The plant takes its feedstock from the ROM and it is processed into four separate product forms for end
users. These product forms are 10% moisture lump, high solids slurry, 1% moisture powder and 1% moisture
pulverised powder. The solids slurry is used in paper and board manufacturing. The other products are used in paper,
coatings, paint and specialist industries including rubber and pharmaceutical applications. Around 20-25kt per
annum is supplied to various end users.
Gabbin Kaolin Project
The 100% owned Gabbin Kaolin Project (White Cloud) is located 215km northeast of Perth, Western Australia. The
project area comprises four granted exploration licences (E70/5039, E70/5332, E70/5333, E70/5517) for 413km 2,
centered around the town and rail siding of Gabbin. The generally flat area is primarily cleared farming land devoid
of native bushland and is currently used for broad-acre cereal cropping. A mining access agreement is in place over
the current resource area with the landowner and occupier.
The main rock types at Gabbin are primarily Archaean granite, gneiss, and migmatite. These rocks are overlain and
obscured by Tertiary sand and Quaternary sheetwash. The weathering profile is very deep and contains thick kaolin
horizons capped by mottled clays or laterite zones. The current JORC 2012 Mineral Resources are 72.5Mt of bright
white kaolinised granite with an ISO Brightness of 80.5%.
Eneabba Silica Sands Project
The 100% owned Eneabba Silica Sands Project is located 300km north of Perth, Western Australia. The project
comprises four granted exploration licences (E70/5001, E70/5322, E70/5323, E70/5324) for 169km 2. The project
is located on the Eneabba Plain whose sandy cover is very flat to gently undulating. Outcrop is rare due to the
accumulations of windblown and alluvial sand at surface. Below this is a thin hard silcrete or lateritic claypan which
overlies deep white and yellow sands.
Share your feedback
Discover